.: Ottoman After:.
.:Crate Before:.
Materials needed:
-Wooden Crate (Any dimension)
-Piece of Plywood (Saw a piece of 1/4 inch plywood to cover up the crate if it has an open side)
-Glue (All-purpose is ok)
-Felt (Thick enough for padding the sides)
-2 inch foam (The kind for padding sofas, to make the "seat") I also padded the bottom side with 1/4 inch foam (I used a kitchen knife to cut the foam & scissors to cut the felt)
-Staples, Nails (Let's say I want a staple gun for christmas)
-Fabric (Sofa quality, but thick curtain fabric should do), Matching Thread.
I won't talk about dimensions, since it entirely depends on the type of crate you can lay your hands on!
Step 1: Close up the crate by nailing the plywood.
Step 2: Measure& cut the foam and felt for each side
Step 3: Glue the padding materials. A small amount is enough
From here on, it seems like I'm missing a few photos (oops!). Step 4: Sew a cover, but making sure the sides are slightly longer than the actual height of the ottoman, so you can tuck the excess fabric under and staple it in place. Step 5: To make the bottom side, you can go lazy easy like me and simply sew a square piece of fabric and glue it. Or go with a suggestion I had [oh yeah, this ottoman gave way to an animated discussion on the design, the making of, the choice of color, the... pretty much anything! It was a Freakin I’m not doing another project with you again fun family DIY=)], which was to make use of rubber strips to make "legs" for the ottoman.
We've been enjoying this ottoman very much at home, especially on movie nights. And talks of making a second one might or might not have been heard...If any family member is reading this, you know who you are, YOU can add the piping, the tufting, the legs...
